|
What is paint
protection film?
Paint protection film is a transparent
polyurethane film
that adheres to the painted surface of vulnerable areas on your vehicle. It can
be removed without any damage to your paint and does not effect appearance and
aerodynamics. It is not visible from just a few feet away and with minimal
maintenance the film will last many years keeping your paint protected while
looking great.
Why choose your kits over the competition?
See our comparison page by clicking here. This is a MUST READ.
Note: Both of our films are
clear coated. Be wary of inexpensive kits from our competitors offering clear
"glossy" film (but non clear
coated) as this won't have the shine you desire and can start to look bad in
just a few short months.
Are your paint
protection kits difficult to install?
We went through extra efforts to
find the perfect product/film that would allow a first timer to have great
success in installing our product. The patterns were designed with the
do-it-yourselfer in mind without sacrificing coverage. Can you apply a
sticker? Can you take 20 minutes to watch a video? If you answered
YES then most likely you will have no troubles installing our films.
We supply the tools needed, instructions, customer support and a great product
so you can succeed with a perfect installation.
Are there any special
tools needed to install the product?
Yes, but we supply them on orders over $75.00.
We include 2 quality 32 oz. sprayers, rubber squeegee, syringe for removing
bubbles, razor type
knife, mirco-fiber towel and video installation instructions. This kit eliminates difficulties due
to not using the proper tools.
For additional tools you may want to add to your
order click here.
How are your paint
protection kits any different from your competitors?
Using the proper film is just half the battle. In
our years of experience as a certified installer we feel that we offer the 2
best films on the market. But aside from using a great film you must have
a proper fitting pattern. Don't be fooled by companies marketing name
brand film
and very poor fitting patterns. In the end you will just be frustrated
because it just won't fit correctly. As the saying goes "You get what you pay
for!".
Is Headlamp film
different than paint protection film?
Paint protection film is 8 mil in thickness and some
companies feel thicker is better for headlamp kits and provide 20-50 mil thick
kits. In our experience these materials are much more difficult to install
and can actually trap in more heat. We use the same film for headlights that we
use for paint protection. You won't be disappointed.
What area of my car
will be covered?
Every year make and model are different. Generally
the hood, fenders, side mirrors, bumpers are included, and other kits have the
option to include headlights, rocker panels, door handles, door edge guards.
Patterns are professionally designed based on each year, make and model. You get
to pick which pieces you want. We don't require purchasing a complete kit like
some of our competitors.
How do I install this kit myself?
On orders over $75.00 we include a very high quality CD and written
instructions. We honestly feel this is a do it yourself product
because our Invisi-Mask film is so easy to work with. The videos & written
instructions will guide
you through every aspect of the installation and if you still feel you can't do
it then contact us and we will provide you with local installer information.
Is there a Certified
Installer in my area?
Most likely! There are
certified installers all over the U.S. and we can provide our customers with
full information upon ordering any of our products if you wish to have an
installer apply the kit. After your purchase, email us at
sales@invisiblemask.com with your
order # or full name for installer details.
Do I need to do anything to
maintain my vehicle once applied?
No, wash and wax as you
normally would.
Can I reuse this material
once opened?
No, Paint Protection film
must be applied immediately upon being removed from its backing. The film can
not be removed and reused once applied.
What is the return policy?
Please click this link. A new
window will appear.
Will this product damage my
paint?
No, of course not! This
product is designed to help protect your paint, not damage it!.
Can it be removed?
Yes. It can be removed easily and will not damage the paint. To remove the film,
you must heat the surface to approximately 120°F while working a corner of the
film with your fingernail. Once you have enough of the material free from the
surface to hold on to, slowly pull the film from the paint. A "safe for paint" adhesive remover
can easily remove any residue if this occurs.
How hard is it to see on the car after it is applied?
The material is over 95% clear. On any color darker than stark white, you can't
see the film from a few feet away. On a stark white car, you can see that ~5% of
color, but it still is "invisible" at a short distance. See our
gallery for some examples.
Will my kit fit perfectly, edge to edge?
Depending on the kit you are applying, some kits are purposely designed short so
that you have to stretch them into place. The purpose of this type of design is
to compensate for a contour on the vehicles surface or to allow room to pull out
excess material around the edges that would otherwise be very difficult to lay
down. The analogy that is most commonly used in talking about applying this
material to a contoured surface is: "Imagine gift wrapping a basket ball, and
all of the wrinkles that you would have in the wrapping paper. Not much you can
do about it, right? Now imagine wrapping the same basketball in Saran Wrap
instead. Stretching the Saran wrap allows it to take the shape of what you are
stretching it over."
How long should I wait to apply
your product if my car has been repainted?
You will need to talk to your body shop and see what they recommend. The time
will vary depending on the type of paint the body shop used, and whether or not
the paint was baked. In any case, the time that they say you should wait to wax
the paint, is the same time you will need to wait to install our product.
Generally this is 30 days.
Do you sell bulk film?
Yes. Please visit this page to order bulk
film.
<click here>
How can I become a dealer
of your paint protection kits?
Please
click here.
|
Free Installation Kit